MPF-I/88

C'est la catégorie reine de l'ordinophile, 8 bits et pas un de plus!
Single board ou bus S-100 acceptés.

Modérateurs : Papy.G, fneck, Carl

jfwal
Messages : 9
Inscription : 09 déc. 2020 21:18

Re: MPF-I/88

Message par jfwal »

Bonsoir,
Voici le mien.
Intéressé par les docs aussi, ainsi que la ROM du FORTH :wink:
Jean-François (l'autre)
MPF-I-88-low.jpg
MPF-I-88-low.jpg (1.23 Mio) Consulté 10600 fois
Avatar de l’utilisateur
jeffounet
Messages : 1563
Inscription : 25 janv. 2020 06:59
Localisation : Les Angles (30)

Re: MPF-I/88

Message par jeffounet »

Bonjour,

@jfwall Jean-François l'autre!!!! :lol: :lol: :lol:

Génial tu as l'alim!!!! je la veux aussi!!!!
pour la doc et le forth je cherche aussi, par contre tu possède une rom qui m'intrigue et donc m'intéresse. La ASM-I/88.
serait-t-il possible d'avoir le dump de tes deux eproms pour comparer, moi je n'en ai qu'une mais pas avec l'étiquette officielle elle est écrite à la main (MPF II/88). Je pourrais la mettre en ligne éventuellement ce weekend.

Bonne journée

Jean-François (pas le même que l'autre!) :roll: :roll: :roll: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
Il n'y a que 11 sortes de gens, ceux qui comprennent ceux qui ne comprennent pas et ceux qui me font répéter!
Jean-François
Avatar de l’utilisateur
jeffounet
Messages : 1563
Inscription : 25 janv. 2020 06:59
Localisation : Les Angles (30)

Re: MPF-I/88

Message par jeffounet »

Bonjour à tous,

Je viens de trouver, sur le site de Leo Bodnar le scan de la doc utilisateur du MPF-I/88, n'ayant pas pu contacter l'intéressé je met le lien pour l'instant.
Si j'obtient l'autorisation je mettrais le fichier en ligne.
En attendant bon téléchargement.
http://leobodnar.com/MPF-I88/Multitech% ... Manual.pdf

@Jfwall,
Je réitère ma demande, est-il possible d'avoir un dump de l'EPROM "ASM I/88" que tu as dans ta machine.
Merci d'avance

Bonne journée à tous

Jean-François
Il n'y a que 11 sortes de gens, ceux qui comprennent ceux qui ne comprennent pas et ceux qui me font répéter!
Jean-François
Avatar de l’utilisateur
jeffounet
Messages : 1563
Inscription : 25 janv. 2020 06:59
Localisation : Les Angles (30)

Re: MPF-I/88

Message par jeffounet »

PS: c'est un scan de très bonne qualité!

On va enfin pouvoir commencer à bidouiller sur nos MPF I/88.

Bonne journée

Jean-François
Il n'y a que 11 sortes de gens, ceux qui comprennent ceux qui ne comprennent pas et ceux qui me font répéter!
Jean-François
Avatar de l’utilisateur
jeffounet
Messages : 1563
Inscription : 25 janv. 2020 06:59
Localisation : Les Angles (30)

Re: MPF-I/88

Message par jeffounet »

Re-bonjour,

oui c'est encore moi.
Je viens de recevoir l'autorisation de l'auteur du fichier pour le mettre en ligne.
Ce fichier est en cours de transferts.
A noter il possède les deux autres livres et m'a dit qu'il allait les scanner et les mettre à disposition. Un grand merci d'avance. :D :D :D

@Fabien tu vas recevoir une notification pour le récupérer. Peux tu le mettre ci-après? Merci
https://download.system-cfg.com/f.php?h=1ZsfdGDo&d=1 (avec compression)

Bonne journée

Jean-François
Il n'y a que 11 sortes de gens, ceux qui comprennent ceux qui ne comprennent pas et ceux qui me font répéter!
Jean-François
leobodnar
Messages : 10
Inscription : 13 déc. 2020 20:32

Re: MPF-I/88

Message par leobodnar »

Bonjour,

I have scanned the Multitech MPF-I/88 Reference Manual as well.
You can use it in any way you see fit.I have also created separate scans with schematic and put it on https://leobodnar.com/MPF-I88/

MPF-I/88 internal 62-pin unpopulated connector seems to have pinout very close to 8-bit ISA bus.

Thanks
Leo
Avatar de l’utilisateur
jeffounet
Messages : 1563
Inscription : 25 janv. 2020 06:59
Localisation : Les Angles (30)

Re: MPF-I/88

Message par jeffounet »

Bonsoir

Fantastique travail!
Merci pour la communauté.
En plus tes scans sont de très bonne qualité cela va nous permettre d'avancer.
Pour ce qui est du brochage il est proche d'un connecteur ISA de PC sauf pour A1, B5 et B7 !!!!!! Attention!!

Bonne soirée
Jean-François

Good evening,
Fantastic job!
Thanks for the community.
In addition your scans are of very good quality that will allow us to move forward.
As for the pinout it is close to an ISA PC connector except for A1, B5 and B7 !!!!!! Attention !! :!: :!: :!: :!: :!:

Good night
Jean-Francois
Il n'y a que 11 sortes de gens, ceux qui comprennent ceux qui ne comprennent pas et ceux qui me font répéter!
Jean-François
leobodnar
Messages : 10
Inscription : 13 déc. 2020 20:32

Re: MPF-I/88

Message par leobodnar »

Hello,
Here is a dump of MON-88 v1.11 http://leobodnar.com/MPF-I88/MON88-v111-uPD27128D-2.BIN

jfwal, if you can not dump ASM-I/88 ROM with a programmer, can you output it as an audio file via cassette tape output into a PC?

All you need to do to output ROM1 (in socket U19) to tape is connect PC audio input to MPF socket MIC, start PC recording and type after the prompt >

Code : Tout sélectionner

W F800:0 F800:4000 /'ROM'/
and hit ENTER.

I can then decode it and upload the ROM contents here.

Thanks
Leo
Dernière modification par leobodnar le 16 déc. 2020 23:01, modifié 4 fois.
leobodnar
Messages : 10
Inscription : 13 déc. 2020 20:32

Re: MPF-I/88

Message par leobodnar »

I had to fix my MPF-I/88 today.
Symptoms: MPF boots into ">" prompt as usual but there is no keyboard input - at all.
It turns out there was no NMI generated by 555 timer circuit because 0.1uF ceramic capacitor C37 went bad.
After replacing it with another one it works again 8)
Leo
Pièces jointes
bad C37.jpg
bad C37.jpg (9.57 Kio) Consulté 10467 fois
replaced C37.jpg
replaced C37.jpg (257 Kio) Consulté 10467 fois
jfwal
Messages : 9
Inscription : 09 déc. 2020 21:18

Re: MPF-I/88

Message par jfwal »

leobodnar a écrit : 16 déc. 2020 12:30 Hello,
Here is a dump of MON-88 v1.11 http://leobodnar.com/MPF-I88/MON88-v111-uPD27128D-2.BIN

jfwal, if you can not dump ASM-I/88 ROM with a programmer, can you output it as an audio file via cassette tape output into a PC?
Hello,
Here are mine:
MON88 1.11 ->27128
ASM88 1.00 ->2764
Thank you very much for the pdf manuals!
JF
MPF-I-88_ROM.zip
(15.58 Kio) Téléchargé 245 fois
Avatar de l’utilisateur
jeffounet
Messages : 1563
Inscription : 25 janv. 2020 06:59
Localisation : Les Angles (30)

Re: MPF-I/88

Message par jeffounet »

Génial,
merci "l'autre JF" de la part de JF... :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
bon je vais me programmer une petite EPROM pour le test de l'ASM il ne reste plus qu'a trouver le Forth!
Et les doc bien sûr!
Merci encore pour la communauté
Bonne soirée

Jean-Francois
Il n'y a que 11 sortes de gens, ceux qui comprennent ceux qui ne comprennent pas et ceux qui me font répéter!
Jean-François
leobodnar
Messages : 10
Inscription : 13 déc. 2020 20:32

Re: MPF-I/88

Message par leobodnar »

Bonjour,

I have updated my page with an example of simple Hello World application.

Also, I have verified that UV eraseable EPROM uPD27C128 can be replaced with AT28C256 in case the original starts to have floating bits.

Thanks
Leo
Avatar de l’utilisateur
jeffounet
Messages : 1563
Inscription : 25 janv. 2020 06:59
Localisation : Les Angles (30)

Re: MPF-I/88

Message par jeffounet »

Hello Leo,
Thank you for your contribution to this forum.
Do you plan to scan the third book?

Thanks again
have a good day

Jean-François

Bonjour Leo,
Merci pour votre contribution à ce forum.
Envisagez vous de scanner le troisième livre?

Encore merci
bonne journée

Jean-François
Il n'y a que 11 sortes de gens, ceux qui comprennent ceux qui ne comprennent pas et ceux qui me font répéter!
Jean-François
leobodnar
Messages : 10
Inscription : 13 déc. 2020 20:32

Re: MPF-I/88

Message par leobodnar »

jfwal a écrit : 19 déc. 2020 18:42 Here are mine:
MON88 1.11 ->27128
ASM88 1.00 ->2764
Thanks for reading them, JF.

MON88 matches mine bit for bit.

However, ASM88 seems to be incomplete.
The code inside 27C64 seems to belong to 0xF800:2000..0xF800:FFFF range if installed in U19 socket. There are a lot of subroutines and literals that are not addressed and there are calls to ROM area below this EPROM, to code in 0xF800:0000..0xF800:1FFF.
I think what happened is someone copied second half of original ASM88 27C128 to this 27C64 - maybe because they did not have 27C128 and were hoping that it would maybe just work. You cannot split 27C128 into two 27C64 without modifying the code because lower address range is in the same socket.

Interestingly, the ASM88 (and I assume BASIC88 and FORTH88) code is written in such a way that CS is not modified anywhere, so it is relocatable and can be used in either U19 or U20 sockets. CS, DS, ES are set by MON88 before the add-on EPROM code is called. Unlike MON88, obviously, that must be in U18 because it contains reset vector at 0xFFFF0.

Leo

P.S. Yes, I will scan the third book when I get a free half a day. It is a MON88 listing.
jfwal
Messages : 9
Inscription : 09 déc. 2020 21:18

Re: MPF-I/88

Message par jfwal »

leobodnar a écrit : 20 déc. 2020 10:24 However, ASM88 seems to be incomplete.
The code inside 27C64 seems to belong to 0xF800:2000..0xF800:FFFF range if installed in U19 socket. There are a lot of subroutines and literals that are not addressed and there are calls to ROM area below this EPROM, to code in 0xF800:0000..0xF800:1FFF.
I think what happened is someone copied second half of original ASM88 27C128 to this 27C64 - maybe because they did not have 27C128 and were hoping that it would maybe just work. You cannot split 27C128 into two 27C64 without modifying the code because lower address range is in the same socket.
Shame on him!
Répondre