MicroProfessor / MPF-1P: looking for the source code of the monitor ROM

C'est la catégorie reine de l'ordinophile, 8 bits et pas un de plus!
Single board ou bus S-100 acceptés.

Modérateurs : Papy.G, fneck, Carl

Ruud
Messages : 12
Inscription : 08 janv. 2021 08:24
Localisation : Heerlen - NL
Contact :

MicroProfessor / MPF-1P: looking for the source code of the monitor ROM

Message par Ruud »

Bonjour,

I obtained a MPF-1P plus a User manual. Although this manual comes with a lot of information, no source code. There were several manuals available for the smaller MPF-1(B), including one with the source code, so I wondered if the source code of the MPF-1P came out in print as well. The reason I want the code: I want to disassemble the ROM so I can change it or use its routines for other ROMs.
Another possibility is that someone already did the job but so far I haven't found anything on internet mentioning this.

So any pointer is welcome et merci beaucoup!

Kind regards, Ruud Baltissen
electrickery
Messages : 31
Inscription : 20 sept. 2020 14:45

Re: MicroProfessor / MPF-1P: looking for the source code of the monitor ROM

Message par electrickery »

Hi Ruud,

J’avais ceci, mais j’ai oublié de le mettre sur le site. Peut-être parce que je l’ai mis sur github: https://github.com/electrickery/MPF-I-P ... tor_source. Ce que j’avais oublié aussi....
----
I had this, but forgot to put it on the site. Perhaps because I put it at github: https://github.com/electrickery/MPF-I-P ... tor_source. Which I had forgotten too....

Greetings,

Fred Jan

PS. PDF of the scans https://electrickery.nl/comp/mpf1/doc/M ... ISTING.pdf
Ruud
Messages : 12
Inscription : 08 janv. 2021 08:24
Localisation : Heerlen - NL
Contact :

Re: MicroProfessor / MPF-1P: looking for the source code of the monitor ROM

Message par Ruud »

Merci beaucoup, Fred Jan!
Cordialement, je vous salue / met vriendelijke groet, Ruud Baltissen

www.baltissen.org/newhtm/index4.htm
gotcha
Messages : 2759
Inscription : 30 mars 2017 11:39
Localisation : Isère
Contact :

Re: MicroProfessor / MPF-1P: looking for the source code of the monitor ROM

Message par gotcha »

Nice, thanks electrickery !

I was thinking about running OCR on the MPF-1B documentation to get its monitor source code.
@electrickery did you already do it too ?

My experience of using OCR for C code was not wonderful. I had to do a certain amount of manual work. Hopefully, it works better for assembly code.
Amstrad CPC et Goupil power :mrgreen:
Bénévole à l'association pour un conservatoire de l’informatique et de la télématique (https://www.aconit.org)
Ruud
Messages : 12
Inscription : 08 janv. 2021 08:24
Localisation : Heerlen - NL
Contact :

Re: MicroProfessor / MPF-1P: looking for the source code of the monitor ROM

Message par Ruud »

I have disassembled and created the source code ages ago. But it is meant to be assembled by my own assembler. Email me private: ruud at baltissen dot org
Cordialement, je vous salue / met vriendelijke groet, Ruud Baltissen

www.baltissen.org/newhtm/index4.htm
electrickery
Messages : 31
Inscription : 20 sept. 2020 14:45

Re: MicroProfessor / MPF-1P: looking for the source code of the monitor ROM

Message par electrickery »

@gotcha:

Oui, c’est au https://electrickery.nl/comp/mpf1/mpf1_u6_monitor.asm. Juste le moniteur, pas Tiny-BASIC.
----
Yes it is at https://electrickery.nl/comp/mpf1/mpf1_u6_monitor.asm. Just the monitor, not Tiny-BASIC.

Greetings,

Fred Jan
Avatar de l’utilisateur
Biff
Messages : 34
Inscription : 31 mars 2021 02:56

Re: MicroProfessor / MPF-1P: looking for the source code of the monitor ROM

Message par Biff »

Voici mes 2 ROM
Pièces jointes
ROM_U2_U3.7z
(15.18 Kio) Téléchargé 36 fois
Répondre