[vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components

Petites annonces "oldies only" sinon c'est dans le "Passage" que ça se passe
(Attention: concerne uniquement le matériel de collection).

Modérateurs : Papy.G, fneck, Carl

Avatar de l’utilisateur
masteries
Messages : 120
Inscription : 09 févr. 2022 13:44

[vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components

Message par masteries »

Greetings,


I finished a batch of my minimalistic and Low Cost General Purpose Fujinet v1.6



These are called general purpose, due to the interface its not only dedicated to Atari 8 bits computers;
the unit is detachable, a DB15 to SIO, DB15 to DIN6, DB15 to RJ12, DB15 to DB19...
allows you to connect the Fujinet v1.6 to each supported (currently or future) computer such Atari 8 bits - Commodore 64 - Coleco Adam - Apple II



The unit includes all the hardware elements of Fujinet v1.6, also the Coleco Adam interface components.

Via jumpers, you can select the desired operation, if Atari 8 bits SIO (C64 as well) or if you desire Coleco Adam Interface.

As well, the unit can be powered externally, or via the SIO interface. There is a jumper to change this selection.

The USB interface is included, in order to update the device.

ESP32 WROVER with 16 MB flash and 8 MB PSRAM




A photograph:

Image


A video, using the device in an Atari 65XE:

https://www.youtube.com/watch?v=_1_GGwkDpXk



Price of an unit is 60€ (comes with an Atari SIO cable); (original unit price is around 100€ and 80€)
each additional cable such C64 - Coleco Adam takes 9€ per cable

plus 6€ of tracked shipment to Spain, or 9€ for Europe, or 10€ for USA, or 11€ for rest of the world.


--------------------------------------------------------



Edited: Tested Coleco Adam compatibility


Some days ago I tested the Low Cost Fujinet v1.6 multiplatform version I manufactured
in a real Coleco Adam.


Update: A video I recorded operating the device in a Coleco Adam computer:

https://www.youtube.com/watch?v=c0pwmi6F7UQ



These images illustrates the Low Cost Fujinet v1.6 running in a Coleco Adam,
using a DB15 to RJ12

Image


Image


Image


Image


Image


Image






Also, the DB15 to SIO cable is illustrated, due to this Fujinet edition contains
both Coleco Adam and Atari 8 bits interface components at same time.
Dernière modification par masteries le 07 juin 2022 21:05, modifié 2 fois.
Avatar de l’utilisateur
masteries
Messages : 120
Inscription : 09 févr. 2022 13:44

Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components

Message par masteries »

Update,

Tested Coleco Adam computer compatibility, see first post edition.
Avatar de l’utilisateur
6502man
Messages : 12286
Inscription : 12 avr. 2007 22:46
Localisation : VAR
Contact :

Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components

Message par 6502man »

@masteries => MP :wink:
Phil.

www.6502man.com

To bit or not to bit.
1 or 0.
Avatar de l’utilisateur
masteries
Messages : 120
Inscription : 09 févr. 2022 13:44

Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components

Message par masteries »

Update,

A video operating the device in a Coleco Adam computer:

Avatar de l’utilisateur
masteries
Messages : 120
Inscription : 09 févr. 2022 13:44

Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components

Message par masteries »

6502man a écrit : 16 mars 2022 11:17
Your hard disk unit and LC Fujinet v1.6 with Coleco Adam cable have been sent today,

You have a private message with tracking number and additional information
Avatar de l’utilisateur
6502man
Messages : 12286
Inscription : 12 avr. 2007 22:46
Localisation : VAR
Contact :

Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components

Message par 6502man »

Test aujourd'hui du Fujinet en version Adam, et ca fonctionne très bien une fois configuré la carte SD et l'interface :

L'extension Fujinet:
Image

Une fois connecté a l'Adam:
Image

Une photo (trouvé sur le net) de tous les softs existant pour Adam, en K7 évidemment.
Pas beaucoup d'exclusivité Adam hormis Dragon's lair, les autres titres sont des reprises
Coleco cartouches améliorés plus ou moins :lol:
Image

Au premier démarrage du Fujinet il faut configurer les divers 'services' (host).
SD pour accèder au softs stockés sur la carte SD
Ensuite les adresses Telenet pour les softs stockés sur divers serveurs.
Image

Connexion sur le serveur Fujinet.online, essentiellement des softs Atari:
Image

Connexion sur Fujinet.driller, avec une section Adam :
Image
Image
Image
Image

Le best of broderbund en version D7 depuis le serveur Fujinet.driller :
Image
Image
Image
Image

Exploration de la carte SD :
Image
Image
Image

le jeu Dragon's Lair en version K7 :
Image
Image
Image

Le SmartBasic (clone de l'Applebasic) en version D7 :
Image
Image
Image
Image

J'ai passé un peu de temps pour regrouper les divers softs Adam et classé sur la carte SD
par support (Disk/TAPE) et type (Games/OS/Tools) :D

Voila donc à tous ceux qui ont un Adam qui ne lit plus les K7 comme le mien, n'hesitez pas
l'interface Fujinet est un bon investissement et de plus compatible avec les Atari et Apple II (à venir)....
Phil.

www.6502man.com

To bit or not to bit.
1 or 0.
Avatar de l’utilisateur
hlide
Messages : 3469
Inscription : 29 nov. 2017 10:23

Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components

Message par hlide »

Hi, I'm looking for a low cost Fujinet:
- Coleco Adam ***
- Atari 800XL *

*** big priority to have
* if available

Any available?

Thanks.
Avatar de l’utilisateur
masteries
Messages : 120
Inscription : 09 févr. 2022 13:44

Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components

Message par masteries »

hlide a écrit : 05 juin 2022 02:11 (supp modo: quote inutile)
Thanks Hlide,

Currently there are 3 manufactured and tested units,

As you know, this Fujinet version is compatible with Atari 8 bits and Coleco Adam at same time :)
(you only need to flash a different Fujinet firmware, of course).

You have a private message with details,
Avatar de l’utilisateur
hlide
Messages : 3469
Inscription : 29 nov. 2017 10:23

Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components

Message par hlide »

@masteries

Payment is done for a Fujinet with Atari 8-bit and Coleco Adam cable. Fujinet mostly for Coleco Adam in my case.
Avatar de l’utilisateur
masteries
Messages : 120
Inscription : 09 févr. 2022 13:44

Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components

Message par masteries »

@hlide

Your LC Fujinet with A8 and Coleco Adam cables has been sent,

You have a private message with tracking number and details,
Avatar de l’utilisateur
tahitibub
Messages : 89
Inscription : 18 juin 2022 08:35
Localisation : Lille et la Côte d'Opale

Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components

Message par tahitibub »

@Masteries

Hello,

Testing of the FujiNet card on Apple II seems quite advanced now.



By any chance, would you be able to provide your card with the cable for the Apple IIc?

Regards
Avatar de l’utilisateur
masteries
Messages : 120
Inscription : 09 févr. 2022 13:44

Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components

Message par masteries »

Yes, currently there are official Apple 2 schematic and firmware

As well, I am researching how to add Apple 2 support into my current Revision B design.
A friend give me for some time an Apple 2 and and Apple 2gs for testing purposes,

I will report as soon I have results,
Dernière modification par masteries le 23 sept. 2022 10:58, modifié 1 fois.
Avatar de l’utilisateur
tahitibub
Messages : 89
Inscription : 18 juin 2022 08:35
Localisation : Lille et la Côte d'Opale

Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components

Message par tahitibub »

That's a great news. Thanks !
Avatar de l’utilisateur
masteries
Messages : 120
Inscription : 09 févr. 2022 13:44

Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components

Message par masteries »

Leraptor06

Your Fujinet for Atari 8 bits has been sent,

Thanks!
Avatar de l’utilisateur
Leraptor06
Messages : 672
Inscription : 15 févr. 2022 10:34
Localisation : Mandelieu

Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components

Message par Leraptor06 »

Thanks 👍
Jp
Répondre